T-shaped flat hanger

The T-shaped flat hanger is a hanging system for frames that is partially visible. White oven-baked paint that blends discreetly into light-colored walls.
These fasteners are highly valued for edge-to-edge hanging.

Installation
The flat T-shaped bracket attaches to the back of the frame—even very thin ones—using two small wood screws (not included).
Due to its thinness, this bracket allows for a very attractive presentation that is almost flush with the wall. The picture will be flush against the wall, but will not be touching it.

The fasteners should preferably be screwed into the top and bottom crossbars of the frame or stretcher, as this allows the height of the object to be adjusted using the oblong holes.
In “sensitive” environments, the use of security screws is recommended for wall mounting.

Hangers are installed in pairs for very small sizes, but generally there should be at least 3 or 4 hangers per object.

These plates can also be used as they are for direct fixing onto a travel frame.

Disponible en 2 dimensions (55×32,5 mm et 45×27,5 mm) par lot de 10 pièces (y compris 10 vis murales à tête blanche et 10 rondelles de protection).

Tip: if walls are damp, increase the ventilation space by fitting stainless steel or white plastic spacers. .

Distribution for