Upper fastener allowing the use of cables by the meter on Planex and Pro-30 wall rails.
This suspender kit is made up of an inverted gripper and a nut with a screw.
The nut can be inserted at any point on the rail from the front. It works as a slide, tightening the screw blocks it in its place.
Nuts can also be made for non-listed rails.
For cables by the metre like 7 × 7 and ø 1.5 mm to 2.5 mm (also exists for ø 1 mm to 1.8 mm cables).
Max load: 68 kg to be reduced according to ø, cable material and type of rail used. Please contact us.
21,50€ / piece
Shipped within: 1-2 weeks
| Quantity : 20 – 99 | 5% |
| Quantity : 100-199 | 10% |
| Quantity : 200+ | 15% |
The weights indicated are based on tests carried out by Chassitech on a traction bench in near-real life conditions. They include a large safety margin but these are for indicative purposes. The load resistance depends very much on how the fastenings are fixed on the object and in the wall”.
| Gripper dimensions | 44 × 12 × 12 mm |
|---|---|
| hole ø for fixing screws | 6,2 mm |
| Material | Stainless steel (screws) |
