Cable suspender for  J -Rails – Dual model

41,50 / piece

Convertible suspenders that can be inserted from the front of the rail, suitable for most conventional rod rails (J-shaped cross-section). These upper fasteners allow terminating cables to be fitted to old rod systems.
The suspender where the top end of the cable is located can be moved horizontally and locked in position by a front screw.

For Chassitech style crimped-end cables up to ø 3 mm. Samples can be lent out.

The dual suspender works in the same way as the standard suspender, but is suitable for heavy loads since it can hold two crimped cables. It is also recommended for extra discretion because during cable hanging, the single cable is replaced by two thinner cables.

For cables of various diameters and lengths adapted to the loads to be supported, see additional products. If you have any questions, please contact us.

In stock

Quantity : 20 – 99 5%
Quantity : 100-199 10%
Quantity : 200+ 15%

Description

Max load: comply with the instructions for each part (rails, cables, lower hangers, etc.). and refer to the ‘weakest link’. If you have any questions, please contact us.

Additional information

Material

Dimensions

You may also like…