Self gripping articulated cable suspender

Créez un compte ou connectez-vous pour connaître votre tarif personnalisé
Create an account or log in to get your personalised discount

/ piece

Cable suspender to use of cables by the meter of ⌀ 1 mm to 1.8 mm on Planex and Pro-30 rails.
This suspender kit is suitable for all types of rails: straight or sloped walls or ceilings. It can also be used in Floor-ceiling wire tensioning.

It is made up of an inverted cable holder and a nut with a screw. The cable holder is articulated, so it can be used with any type of layout. The nut works as the slide; it can be inserted at any point on the rail from the front and is held in place thanks to a spring. The cable can be fed into the gripper in which it is automatically stuck without tools. Remove the cable by disengaging the gripper (nuts for rails that are not in stock can be made or supplied).

For 7 × 7 cables by the metre.
The indicated loads are to be reduced according to the Ø, cable material and type of rail used. Please contact us.

Shipped within: 1-2 weeks

Quantity : 20 – 99 5%
Quantity : 100-199 10%
Quantity : 200+ 15%


The weights indicated are based on tests carried out by Chassitech on a traction bench in near-real life conditions. They include a large safety margin but these are for indicative purposes. The load resistance depends very much on how the fastenings are fixed on the object and in the wall”.

Additional information


Max. recommended load

You may also like…