Self gripping cable suspender for ceiling rails


Suspender for Planex and Pro30 ceiling rails. Suitable for 7 × 7 style cables by the metre.
This lockable suspender is made up of two parts: the insertable nut (in zinc-plated steel) and the gripper (nickel-plated brass).
The nut can be inserted into the rail from the front at any point, after which the gripper can be screwed into the nut.
The cable can be fed into the gripper in which it is automatically stuck without tools. The cable can be removed without tools by disengaging the gripper. Safety locking by turning the safety ring (useful if the rail is accessible).

2 designs: one for 1 mm to 1.8 mm cables and one for 1.5 mm to 2.5 mm cables.
The indicated loads are to be reduced according to the Ø, cable material and type of rail used. Please contact us.

Quantity : 20 – 99 5%
Quantity : 100-199 10%
Quantity : 200+ 15%


The weights indicated are based on tests carried out by Chassitech on a traction bench in near-real life conditions. They include a large safety margin but these are for indicative purposes. The load resistance depends very much on how the fastenings are fixed on the object and in the wall”.

Additional information


Max. recommended load


You may also like…