Self gripping cable suspender for wall rail – for ø1.5 mm to 2.5 mm cables

Créez un compte ou connectez-vous pour connaître votre tarif personnalisé
Create an account or log in to get your personalised discount

/ piece

Upper fastener allowing the use of cables by the meter on Planex and Pro-30 wall rails.
This suspender kit is made up of an inverted gripper and a nut with a screw.
The nut can be inserted at any point on the rail from the front. It works as a slide, tightening the screw blocks it in its place.

Nuts can also be made for non-listed rails.

For cables by the metre like 7 × 7 and ø 1.5 mm to 2.5 mm (also exists for ø 1 mm to 1.8 mm cables).
Max load: 68 kg to be reduced according to ø, cable material and type of rail used. Please contact us.

Out of stock


The weights indicated are based on tests carried out by Chassitech on a traction bench in near-real life conditions. They include a large safety margin but these are for indicative purposes. The load resistance depends very much on how the fastenings are fixed on the object and in the wall”.

Additional information

Gripper dimensions

44 × 12 × 12 mm

hole ø for fixing screws

6,2 mm


You may also like…